Home

Systems
..Lateral
 ..Modular Lateral
 ..Manual
..Mechanical
..Electrical

Options
..Handles
..Anti-Tip
..End Panels
..Drives
..Deck & Ramp
..Hipaa Doors
..Shelving/Cabinets

Literature & Info
..Request Literature
..Install Manual
..Specifications
..CAD Layouts
..GSA Contract Info
..Warranty
..Dealer Price Lists
..Find a Dealer
..Price A System
..Customer Lists
..Why Us
..Contact Us
..Driving Directions

2000-1

Used on the smallest of systems where resistance is at a minimum, recommended for systems no wider than 8'.
This ratio moves 2,200 lbs. of material with 1lb. of pressure.

4000-1

 The 4000-1 ratio is used on systems betwen 8' & 14'. Because of the extra weight on these size systems a higher ratio makes moving the carriages child's play.
This ratio moves 2,200 lbs. of material with 1lb. of pressure.

8000-1

 Systems of 15' & up can be very heavy & difficult to move. This is where our 8000-1 ratio comes into its own. You`ll be amazed how easy your system moves.
This ratio moves 2,200 lbs. of material with 1lb. of pressure.

 

FRONT DRIVE
The Front Drive is used on carriages up to but not including 9'. It works by having a single Mechanical Track at the front of the system. The drive unit is typically either a 2000-1 or a 4000-1 Drive unit. Carriages are reinforced with cross bracing to prevent "Racking".
SHAFT DRIVE
The Shaft Drive is used on carriages 9' and longer when a Front Drive is not sufficient for the length. The carriages are driven throughout the length of the carriage to give smooth movement with no "Racking" or "Twisting".
HEAVY DUTY DRIVE SYSTEM
Our new Heavy Duty Shaft Drive carriage is designed with weight capacity in mind. Until now Mobile Media has only produced Aluminum carriages. Now we have a steel system that can hold 1250 lbs. - 2200 lbs. with an upgrade.